Offense
Flex offense
A coach's guide to the flex offense: the flex cut, screen-the-screener continuity, entries, counters when the guard pass is denied, and the drills to teach it.
Chris Collinsworth · · 8 min read
The flex offense is a 4-out, 1-in continuity offense built on two repeating actions: a cross screen across the baseline near the rim, and a down screen for that screener up top. A classic screen-the-screener action. Run the pattern correctly and it hunts two shots over and over — a layup off the flex cut and a jumper from the elbow — while a ball reversal resets the whole thing to the other side. It's patient, it's positionless, and it's about as teachable as a full offense gets.
#What is the flex offense?
A continuity offense is characterized by a pattern of movement, cuts, screens and passes which eventually leads back to the starting formation, at which point the pattern repeats. The flex is one of the classics in that family. It is one of the simplest forms of continuity offense, with the combined benefit of being great for beginners and highly effective if executed properly — used from high school to college to the NBA.
Here's the shape. You have four players out (two at the top, two in the corners/wings) and one on the block. The flex is a 4-out, 1-in continuity offense that primarily uses down-screens in a screen-the-screener action and the famous 'flex cut' to get open layups or jump shots around the high post. The two shots it manufactures are specific: the basic continuity is designed to get an open shot from two areas — a layup off the flex cut, and a jump shot around the high post.
If you want a feel for the 4-out, 1-in spacing and the baseline rotation before you layer the screens in, walk through this base alignment first.
#How does the continuity work, pass by pass?
The engine is a guard-to-guard pass up top that triggers everything underneath it. The offense starts with a guard-to-guard pass; after the flex cut, the screener down-screens for the cutter who comes to the elbow looking for the pass and jump shot, and you end up in the same basic set you started in, so the pattern has continuity and repeats from side to side.
Trace one full rep:
- Ball is reversed with a pass from one top guard to the other.
- On the reversal, the weakside corner player makes the flex cut across the baseline, using the screen set by the player on the block. First look is a layup.
- If the cut isn't open, the player who set that baseline screen now gets a down screen from a teammate up top and pops to the elbow for the jumper. That's the "screen-the-screener," or pick-the-picker. The offense is a patterned offense relying on cuts across the key (the flex cut) and down screens to create a pick-the-picker action.
- You're back in the original alignment on the opposite side. Reverse the ball and run it again.
That down screen for the popping shooter is the single most repeatable piece of the offense — isolate it on its own first.
Two details coaches underrate. First, the shot off the second action matters as much as the layup — the best flex teams get as many points from the screener popping off the down screen as they get from the flex cut itself. Second, the geometry gives you a rebounding edge: the flex continuity also provides strong offensive rebounding and second efforts by constantly having two rebounders on the weakside.
#Why run it? (and who should)
The honest pitch is that this offense does a lot of teaching for you.
- It's positionless. The flex is a slow-down, patient, 4-out, 1-in continuity offense that allows all five players to play all five positions. Everybody screens, everybody cuts, everybody shoots the elbow jumper. Good for development, good when you don't have a true point guard.
- It creates mismatches on its own. Size mismatches often occur due to the screening and defensive switching — which is exactly what you want to attack once you've trained your players to read a switch.
- It's teachable and it has a championship pedigree. At the collegiate level, Gary Williams won the 2002 NCAA championship with Maryland using the flex; advantages are that it's a patterned offense with continuity, it's somewhat flexible, and it's relatively easy to teach. Even Williams said he stole it off a national champion.
Where it fits best: patient teams, teams that rebound the ball, and teams that would rather execute one thing cleanly than run ten set plays poorly.
#Where did the flex come from?
Worth knowing so you can tell your players this isn't a gimmick. The flex offense was originally known as the "cha cha," and is a variation of the shuffle offense. It was created in 1967 by Rene Herrerias at Cal and popularized in the mid-1970s by Carroll Williams at Santa Clara. It has been a staple in American high school gyms for roughly six decades.
#What do the top results miss?
Most flex pages show you the pretty continuity and stop. The problem is that good defenses don't let you run the pretty continuity. Here's what actually decides whether your flex scores.
#How do defenses take the flex away?
Two ways, and you need an answer for both.
They deny the guard-to-guard pass. This is the first thing a scouting-literate opponent does. The defense may defend the flex by stopping the initial pass; if that pass is prevented with high man-to-man pressure, the continuity cannot start, effectively stalling the offense. And it's predictable enough to invite that pressure: as the constant guard-to-guard pass is predictable, a common method to stop the flex is to completely deny this pass, and if you don't have corner options your offense will stall.
The counter is a backdoor. When they overplay the reversal, the top guard cuts straight to the rim instead of fighting to catch. Train the read so your players attack the denial rather than standing and waiting for the ball. Here's the clear-out cut to drill against pressure:
They switch the screens. The flex is predictable, and it can be defended by switching the screens. That's not fatal — it's an invitation. When they switch the baseline flex screen, you've got a guard on a big or a big on a guard. The screener seals, you throw it inside, you play the mismatch. If you never teach the seal-and-read, switching kills you; if you do, switching feeds you. Teach the screen-and-seal as its own action:
#What counters and entries keep it from being scouted?
Don't run flex naked. Build in entries so the defense can't key on the guard-to-guard pass, and corner options so a denial doesn't dead-end you. The corner wrinkle: the post player screens for the opposite guard cutting to the far corner, and when the ball is passed from the corner back out to the guard, the familiar flex cut repeats. That's your release valve when the top is pressured.
A modern note that most guides skip entirely: the full continuity is less common at the highest level now. NBA teams no longer run the full version — they treat the flex screen as a single action within a larger system. The lesson for you isn't to abandon the continuity; it's that the flex screen itself is a dangerous standalone action you can drop into your out-of-bounds plays and quick-hitters. The high-post screen-and-seal above is a good example of flex action lifted out and used on its own.
#How do you teach it in practice?
Build it in pieces, not all at once. The number one job is the continuity — the basic continuity is the heart of the offense, and all entries, sets, and variations develop from it. But you teach it by breaking it down.
1. The screen-the-screener shooting rep. Start here because it's the part players execute worst. This flex drill isolates and simulates the "screen the screener" action that occurs after the flex screen; it improves players' footwork and ability to knock down shots coming off the screen. Rep the down screen, the elbow pop, and the catch-and-shoot until the footwork is automatic.
2. Breakdown drills for the reads. Once the shots are clean, add decisions. Good breakdown progressions include 1-on-1 pivoting, drive-and-kicks, and pull-up reps built off the flex action. This is where you teach the backdoor-on-denial and the seal-on-switch so they're reactions, not plays you call.
3. Then — and only then — run full continuity. Start the flex slowly; it does not need to be quick to work effectively. Patience is a feature. Rushing the reversal is how you get a bad flex cut and a dead possession.
A conditioning caveat the better coaches flag: the flex lives on legs. By mid-November most teams notice the same thing — the legs go late and the shot goes with them. If your season offense is going to be a continuity that fires elbow jumpers off screens, your shooting-while-tired has to be a practice staple, not an afterthought.
#Putting it together
The flex rewards teams that commit to it. Teach the two actions — the flex cut and the screen-the-screener — until they're reflex, drill the shot off the down screen as hard as the layup, and script your answers before the defense forces them: backdoor when they deny the reversal, seal-and-feed when they switch. Done that way, "predictable" stops being a weakness and becomes a trap you set.
When you're installing it, it helps to see the actions move rather than read them off a static diagram. On basketball.dev you can lay the flex out like a whiteboard, animate each cut and screen, and save your own entries and counters so you can reuse them from season to season and share them with your staff. Pair this page with the related glossary entries for the flex cut, down screen, and continuity offense as you build your install.
